Avet MXL,,, Magnet

[dayday]

Mods,,, And, Surf Casters,,,

Can Avet MXL,,, Do LONG Distance Casting,,,?

Is There A Way To Stick A Magnet Inside The MXL,,,?

What Type Of Magnet N Where Can I Buy It From,,,?

[Ozzy]

DayDay,

Sure it can be done. I have an Avet SX that have a magnet stick to the left side plate. The mod is done by one of our fellow casters here. I'll try to get some photos for the benefit of the rest. The mag reel can cast the 15lbs mono lines with 60lbs shock leader with long range single hook rig with pasir pasir easily without any over run (bee hoon). Distant wise not too sure perhaps estimated in the excess of 100m base on the remaning line bal on the spool after the cast. There are surf fishios/casters that are able to cast further than this without problem provided the rig itself is streamlined and held by the impact shield to minimise the helicopter resulting in shorter casting distant.

For MXL it definitely can be mag but not so easy for surfcasting cos abit bulky and heavy. Hope this helps.

Cheers,

Ozzy

[dayday]

Qzzy,,,

For SX Ive Seen Magnet Stick On The Inner Left "C" Plate With Micro Magnet N White Magnet,,, Using Dauble sided Tape (3m), Or Epoxy,,,

MXL DO Not Have A "C" Plate,,, May B U Can Find Out Where To Stick The Magnet N How Many Magnet N Where To Get The Magnet,,,

Ozzy Tks For The Info,,,

[Ozzy]

DayDay,

This mod might exite you a little bit. This is an adjustable type. It is done professionally by Chris Macey from UK. Nice but a bit costly.

Cheers

[AmbeRjacKHunter]

Ozzy, got magnet to pull up the fishes tak .... I want lah...jadi tak penat narik. :P maklum lah nelayan purba...tak pandai nak godeh godeh.....

Sat got some free time to join us at Sultan's Cafe ? DD will be coming I assume...physlo too....N the rest jugak...

Salam
Bro RK

[dayday]

Ozzy Nice Pic,,, N Power Magnet,,,
Looks Like A Washer N A Magnet,,, How Much Is The COST,,,

Tks OZZY,,,

[dayday]

Bro Rk Insaallah Saya Akan Cuba Hadir,,,

[Ozzy]

Ozzy, got magnet to pull up the fishes tak .... I want lah...jadi tak penat narik. :P maklum lah nelayan purba...tak pandai nak godeh godeh.....

Sat got some free time to join us at Sultan's Cafe ? DD will be coming I assume...physlo too....N the rest jugak...

Salam
Bro RK

Bro RK,

Sat cannot promise la cos you lah Sat always become despatchman must send daughter lah Minister of Home affairs lah and so ON. Will try but cannot commit lah. Hope your understand. Take care

DayDay

You can visit this link and make any enquiry pertaining to you requirement. Hope this will help.

http://homepage.ntlworld.com/christo...acey/index.htm

For my SX our local kaki juz make use of unused C shape magnet from damaged hardware part. It works juz as fine but non-adjustable and do not have permanent hole at the side plate. Next time want to sell got no issue with the price.

[dayday]

Ozzy Tks For The Site,,,

May Ur Meet Up With Ur Surt Caster Gang,,,Try To Find Out Where Can I Get Those Magnet In Singapore,,,

Salam>>>> Fendi (DD),,,

[physlo]

Bro RK,

I will join you guys around 2pm.

Salam
physlo

[AmbeRjacKHunter]

Bro RK,

I will join you guys around 2pm.

Salam
physlo

Ok..roger that Dros

[mikeewee]

DayDay,

Sure it can be done. I have an Avet SX that have a magnet stick to the left side plate. The mod is done by one of our fellow casters here. I'll try to get some photos for the benefit of the rest. The mag reel can cast the 15lbs mono lines with 60lbs shock leader with long range single hook rig with pasir pasir easily without any over run (bee hoon). Distant wise not too sure perhaps estimated in the excess of 100m base on the remaning line bal on the spool after the cast. There are surf fishios/casters that are able to cast further than this without problem provided the rig itself is streamlined and held by the impact shield to minimise the helicopter resulting in shorter casting distant.

For MXL it definitely can be mag but not so easy for surfcasting cos abit bulky and heavy. Hope this helps.


Hi, i like to mag my mx, can anyone do it for me?
Cheers,

Ozzy

Hi, i like to mag my mx, can anyone do it for me?


Cheers

[physlo]

Bro, try contact Gary @ 93841567 to enquire.

Regards
physlo

[mikeewee]

Bro, try contact Gary @ 93841567 to enquire.

Regards
physlo

have called him up, will be meeting him up tomorrow...


Thanks anyway.....


Cheers.

[Jedi Shikari]

have called him up, will be meeting him up tomorrow...


Thanks anyway.....


Cheers.

What's the outcome of the meeting with Gary ?