Bluewater Fishing Expedition
Jigging Popping Trolling Deep Sea Fishing Big Game Fishing Charters Saltwater Fishing Guides
Need Help - Accurate 665H
This is a discussion on Need Help - Accurate 665H within the Maintenance, Rebuilds and Tuning forums, part of the After Hours category; I have decided to maintain my Accurate 665H and downloaded the step by step dismantling and maintenance of the reel ...
| |||||||
| Register | FAQ | Members List | Calendar | Mark Forums Read |
04-04-2007, 11:26 PM
| #1 |
| Member Join Date: May 2005 Location: Bishan
Posts: 59
Rep Power: 4  | Need Help - Accurate 665H I have decided to maintain my Accurate 665H and downloaded the step by step dismantling and maintenance of the reel from the Accurate website. However I unable to separate the spool from the side-plate. In the illustration it was noted that no force is required to separate it. Any clues how to separate this 2 items? Thanks Les |
|      |
|
04-04-2007, 11:35 PM
| #2 |
| Senior Member  Join Date: Mar 2005 Location: Singapore
Posts: 1,086
My Mood:  Rep Power: 6 | Re: Need Help - Accurate 665H I'm sure Master Makaira will be ready to assist!  |
|
| |
|
04-04-2007, 11:50 PM
| #3 |
| Member Join Date: Dec 2005 Location: sg
Posts: 46
Rep Power: 0 | Re: Need Help - Accurate 665H Take out your drag adjustment knot, there should be a c clip. |
|
| |
|
05-04-2007, 12:32 AM
| #4 | |
| Senior Member  Join Date: Jan 2004 Location: Singapore
Posts: 746
Rep Power: 5 | Re: Need Help - Accurate 665H Quote:
I am just a humble user ......... not so adventurous ....... I leave all maintenance stuff to the boys at AO  I think Nelson got it right though. | |
|
| |
|
05-04-2007, 07:56 AM
| #5 | |
| Member Join Date: May 2005 Location: Bishan
Posts: 59
Rep Power: 4 | Re: Need Help - Accurate 665H Quote:
| |
|
| |
|
05-04-2007, 08:37 AM
| #6 | |
| Moderator  Join Date: May 2005 Location: Brunei
Posts: 759
My Mood:  Rep Power: 4  | Re: Need Help - Accurate 665H Quote:
Les, If you have removed the e-clip under the cap of the preset knob and the right sideplate will still not lift off the spool, you may need to push the spool shaft off through the cam bearing. Whilst the instructions do say that no force should be required, it has been my experience that the tolerances are so tight in the Accurate reels that it may require some gentle force to push the shaft through that bearing. If you don't think you want to try that, best bring the reel to Benji and ask him to show you how to do it. More often than not, this is an indication that you may need a new cam bearing. Also note that some of the illustrations in the 665 Powerpoint are of an older 665 and for example the drag cover screw setup may not be the same on your reel as that in the pictures. Its all very simple though and should not pose a problem. Remember to check the clip and washer that reside under the right drag plate as well as the right spool bearing. Both are suspect areas for corrosion. Regards, Saimee
__________________ "...a man only hears what he wants to hear and disregards the rest..." Simon & Garfunkel "The Boxer" | |
|
| |
|
05-04-2007, 01:33 PM
| #7 |
| Member Join Date: May 2005 Location: Bishan
Posts: 59
Rep Power: 4 | Re: Need Help - Accurate 665H Saimee, Will give it a go again tonight. If that fails will go and see benji. Thanks dude for the advice Les |
|
| |
|
07-04-2007, 05:52 AM
| #8 |
| Moderator  Join Date: Mar 2007 Location: saratoga, ca
Posts: 93
Rep Power: 2 | Re: Need Help - Accurate 665H i have had to gently "tap" a couple of these out. please excercise care. just found this...... Accurate Servicing Last edited by alantani : 07-04-2007 at 06:41 AM. |
|
| |
 |
« avet sx rebuild
|
First Question for Alan- Is there a Ctex drag set that fit Daiwa Millionaire SW203? »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
All times are GMT +8. The time now is 02:27 PM.
