Bluewater Fishing Expedition

galanted · 22-08-2006, 11:17 AM

Hi all,

Need some help from fellow experienced anglers here for some recommendations.

As i don't use spinning outfit for bottom at all but as my father-in-law whom reccently started to join me in short trips around the neighbouring area and the furthest should be Tanjung Pinang, i was thinking to get a spinning set for him as he prefers spinning reels and for me to act as a spare set. I'm prefer to be a bit "kiasu" therefore looking at PE2-5 range of outfit.

A Big THnkas for any replies in advance!

Cheers!

octopus · 22-08-2006, 11:29 AM

galanted, what is your budget range? Think for PE2-5 quite a lot of choices.

htchng · 22-08-2006, 12:16 PM

jigwrex spinner PE5 rod + stella SW 8000PG.. confirm not kiasu liao kua??

u need it for wat purpose bro??

galanted · 22-08-2006, 02:06 PM

Thanks Octopus & htchng.

My Budget would be below $500 for both. Main purpose is should be for bottom fishing at Tanjung Pinang area.

edylie · 22-08-2006, 02:08 PM

Quote:

Originally Posted by galanted

Thanks Octopus & htchng.

My Budget would be below $500 for both. Main purpose is should be for bottom fishing at Tanjung Pinang area.

Using spinning reel for bottom fishing is not ideal because it is difficult to drop the line into the bottom. But if your father in law insists ... i would recommend to get a jig wrex + daiwa freams J 4500

But i hope you could consider to use an overhead setup.

0.2cents
Edy

galanted · 22-08-2006, 02:19 PM

Thanks edylie!

Is the Freams 4500J suitable for a PE2-5 Rod? I'll need 300mtr of PE3 Braided Line and a Drag Settings similiar to the Avet SX at +-9ibs.

Fish_Fingers · 22-08-2006, 06:03 PM

Can. FreamsJ can do the job according to your stated requirements. No problem.

galanted · 22-08-2006, 10:53 PM

Thanks Guys!

htchng · 23-08-2006, 01:24 AM

edy.. how much jigwrex selling in sg? our buddy's budget $500... enuf a?? framesJ should be able to take in 300M of PE4.. so it's not a problem.. and it's selling for $160 may be??

edylie · 23-08-2006, 01:26 AM

Quote:

Originally Posted by htchng

edy.. how much jigwrex selling in sg? our buddy's budget $500... enuf a?? framesJ should be able to take in 300M of PE4.. so it's not a problem.. and it's selling for $160 may be??

Hi David,

I dont know the costs of the jigwrex man

but i think it should be Sing$250+-

Cheers,
Edy

galanted · 23-08-2006, 10:08 AM

Freams and Jigwrex seems to be my choice in this case. Freams should be retailing at 150+- and Jigwrex 250+- and still got some $$$ for PE4 YGK Jigman line. Sounds ok for my budget!

Thanks Guys!

htchng · 23-08-2006, 10:18 AM

thats the way

but bottom with a spinner? mmm... frankly i never tried b4.

physlo · 23-08-2006, 12:19 PM

Bro,

Jigwrex PE 5 @ around $250 and pair with a Banax GT 4000 @ around $120.

Cheers
physlo

galanted · 23-08-2006, 02:01 PM

Quote:

Originally Posted by htchng

thats the way

but bottom with a spinner? mmm... frankly i never tried b4.

It's out of no choice bro! Father-in-law much prefers Spinning set.

galanted · 23-08-2006, 02:02 PM

Quote:

Originally Posted by physlo

Bro,

Jigwrex PE 5 @ around $250 and pair with a Banax GT 4000 @ around $120.

Cheers
physlo

What Brand is a Banax?

eeyore · 23-08-2006, 02:23 PM

Quote:

Originally Posted by galanted

What Brand is a Banax?

If I am not wrong Banax is a product from Korea and it is also rather popular in malaysia.

Shimano jigwrex pe5 selling $269.00 after 20% discount at TTC.

htchng · 23-08-2006, 05:41 PM

$269 not bad not bad... bannax oso can... there's a review on this reel but couldn't recall where's that...

edylie · 23-08-2006, 06:23 PM

It is here ... Banax reel ... Posted by Edros

http://fishingouting.com/forums/showthread.php?t=1233

The reel looks quite solid!

Cheers,
Edy

galanted · 23-08-2006, 09:33 PM

Thanks Guys! I think i would stick to FreamsJ as it's been well rated countless times. Still feel it's a safer bet.

Any comments on the Jigwrex? Is it well worth that 269 Bucks? Also, does it comes in Butt Joint?

fiore · 29-08-2006, 11:04 PM

yup the jigwrex comes with butt join. I think for $269 its worth the money. I own the jigwrex 1-3 and it serves its purpose well. I think the freams u can go beach rd and get it. Slightly cheaper than at Changi. BUt be reminded, the jigwrex is made in batam and the freams is made in thailand...hope this helps!

stickbom! · 30-08-2006, 07:15 AM

Made in Batam is not an issue. What matters is who's making it

I've seen and used the Wrex. Can't complain for the decent price tag it comes with

22-08-2006, 11:17 AM	#1
galanted Member Join Date: Jul 2006 Location: EAST Posts: 42 My Mood: Rep Power: 0	Need Recommendation for a PE2-5 Spinning Outfit. Hi all, Need some help from fellow experienced anglers here for some recommendations. As i don't use spinning outfit for bottom at all but as my father-in-law whom reccently started to join me in short trips around the neighbouring area and the furthest should be Tanjung Pinang, i was thinking to get a spinning set for him as he prefers spinning reels and for me to act as a spare set. I'm prefer to be a bit "kiasu" therefore looking at PE2-5 range of outfit. A Big THnkas for any replies in advance! Cheers!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

22-08-2006, 11:29 AM	#2
octopus Moderator Join Date: Apr 2005 Location: JB, Malaysia Posts: 180 Rep Power: 4	galanted, what is your budget range? Think for PE2-5 quite a lot of choices.

22-08-2006, 12:16 PM	#3
htchng Senior Member Join Date: May 2005 Location: PG MY Posts: 112 Rep Power: 4	jigwrex spinner PE5 rod + stella SW 8000PG.. confirm not kiasu liao kua?? u need it for wat purpose bro??

22-08-2006, 02:06 PM	#4
galanted Member Join Date: Jul 2006 Location: EAST Posts: 42 My Mood: Rep Power: 0	Thanks Octopus & htchng. My Budget would be below $500 for both. Main purpose is should be for bottom fishing at Tanjung Pinang area.

22-08-2006, 02:19 PM	#6
galanted Member Join Date: Jul 2006 Location: EAST Posts: 42 My Mood: Rep Power: 0	Thanks edylie! Is the Freams 4500J suitable for a PE2-5 Rod? I'll need 300mtr of PE3 Braided Line and a Drag Settings similiar to the Avet SX at +-9ibs.

22-08-2006, 06:03 PM	#7
Fish_Fingers Member Join Date: Apr 2005 Location: Sillypore Posts: 60 Rep Power: 4	Can. FreamsJ can do the job according to your stated requirements. No problem.

22-08-2006, 10:53 PM	#8
galanted Member Join Date: Jul 2006 Location: EAST Posts: 42 My Mood: Rep Power: 0	Thanks Guys!

23-08-2006, 01:24 AM	#9
htchng Senior Member Join Date: May 2005 Location: PG MY Posts: 112 Rep Power: 4	edy.. how much jigwrex selling in sg? our buddy's budget $500... enuf a?? framesJ should be able to take in 300M of PE4.. so it's not a problem.. and it's selling for $160 may be??

23-08-2006, 10:08 AM	#11
galanted Member Join Date: Jul 2006 Location: EAST Posts: 42 My Mood: Rep Power: 0	Freams and Jigwrex seems to be my choice in this case. Freams should be retailing at 150+- and Jigwrex 250+- and still got some $$$ for PE4 YGK Jigman line. Sounds ok for my budget! Thanks Guys!

23-08-2006, 10:18 AM	#12
htchng Senior Member Join Date: May 2005 Location: PG MY Posts: 112 Rep Power: 4	thats the way but bottom with a spinner? mmm... frankly i never tried b4.

23-08-2006, 12:19 PM	#13
physlo Moderator Join Date: Mar 2005 Location: Pasir Ris Posts: 712 Rep Power: 4	Bro, Jigwrex PE 5 @ around $250 and pair with a Banax GT 4000 @ around $120. Cheers physlo

23-08-2006, 05:41 PM	#17
htchng Senior Member Join Date: May 2005 Location: PG MY Posts: 112 Rep Power: 4	$269 not bad not bad... bannax oso can... there's a review on this reel but couldn't recall where's that...

23-08-2006, 06:23 PM	#18
edylie Administrator Join Date: Jan 2004 Location: Singapore Posts: 1,000,036 My Mood: Rep Power: 10	It is here ... Banax reel ... Posted by Edros http://fishingouting.com/forums/showthread.php?t=1233 The reel looks quite solid! Cheers, Edy

23-08-2006, 09:33 PM	#19
galanted Member Join Date: Jul 2006 Location: EAST Posts: 42 My Mood: Rep Power: 0	Thanks Guys! I think i would stick to FreamsJ as it's been well rated countless times. Still feel it's a safer bet. Any comments on the Jigwrex? Is it well worth that 269 Bucks? Also, does it comes in Butt Joint?

29-08-2006, 11:04 PM	#20
fiore Junior Member Join Date: Aug 2006 Location: paris Posts: 26 My Mood: Rep Power: 0	yup the jigwrex comes with butt join. I think for $269 its worth the money. I own the jigwrex 1-3 and it serves its purpose well. I think the freams u can go beach rd and get it. Slightly cheaper than at Changi. BUt be reminded, the jigwrex is made in batam and the freams is made in thailand...hope this helps!

30-08-2006, 07:15 AM	#21
stickbom! Super Moderator Join Date: Jan 2004 Location: Eastern Sider Posts: 1,996 My Mood: Rep Power: 6	Made in Batam is not an issue. What matters is who's making it I've seen and used the Wrex. Can't complain for the decent price tag it comes with

Bluewater Fishing Expedition

Need Recommendation for a PE2-5 Spinning Outfit.

Need Recommendation for a PE2-5 Spinning Outfit.